ConstructionDist.com |

Magazine Article

  

Nailers
Product Knowledge

XM International Tap-Cap Stapler
XM International Tap-Cap Stapler
Pneu Tools Metal Hanger Nailers
Pneu Tools Metal Hanger Nailers
Powers Gas Nailer
Powers Gas Nailer
Makita Clipped Head Framing Nailer
Makita Clipped Head Framing Nailer
Paslode Cordless Framing Nailer
Paslode Cordless Framing Nailer
Hitachi Gas-powered Framing Nailer
Hitachi Gas-powered Framing Nailer
Kihlberg Apach Coil Nailer
Kihlberg Apach Coil Nailer
Ridgid Framing Nailers
Ridgid Framing Nailers
MAX Joist Hanger Nailer
MAX Joist Hanger Nailer
Prebena Cordless Nailer
Prebena Cordless Nailer
Senco Joist Hanger Nailers
Senco Joist Hanger Nailers
Bostitch Metal Connector Nailer
Bostitch Metal Connector Nailer
PNI Mallet-activated Nailer
PNI Mallet-activated Nailer
PrimeSource Pneumatic Tools
PrimeSource Pneumatic Tools
Milwaukee Introduces Pneumatic Nailers
Milwaukee Introduces Pneumatic Nailers
PAM Autofeed Screw Gun
PAM Autofeed Screw Gun
Spotnails 15 Gauge Stapler
Spotnails 15 Gauge Stapler
Primatech Flooring Gun
Primatech Flooring Gun
DeWalt Brad Nailer
DeWalt Brad Nailer
Porter Cable Nailer Kit
Porter Cable Nailer Kit
Simpson Quik Drive System
Simpson Quik Drive System

XM International Tap-Cap Stapler
This X-Cell stapler is fast and efficient.

  • Weighs less than 4 pounds
  • Up to 100-staple capacity
  • Operates at pneumatic pressures of 70 to 100 psi
  • Handles 1- and 1 1/14-inch staples
  • 1-inch cap diameter

INDICATE 156 ON INQUIRY CARD

Pneu Tools Metal Hanger Nailers
These are lightweight, single blow nailers.

  • RNS-150 nailing system drives 1.5-inch paper or plastic nails
  • RNS-250 drives 1.5- and 2.5-inch paper and plastic nails

INDICATE 157 ON INQUIRY CARD

Powers Gas Nailer
The W3 21R is a gas-operated nailed for wood-to-wood applications.

  • Delivers round-head nails through a track feeding system
  • Weighs 7.8 pounds
  • Can use 2- to 3 1/4-inch nails
  • Allows framers to work without compressors, hoses, etc.

INDICATE 158 ON INQUIRY CARD

Makita Clipped Head Framing Nailer
This is one of four new models in the line.

  • AN942 is a 31-degree clipped head nailer
  • Features nail mode selector for sequential firing or bounce firing
  • Adjustable nail depth dial allows for nine different settings
  • Shoots nails from 2 to 3 1/2 inches long
  • Weighs 8.4 pounds

INDICATE 161 ON CARD

Paslode Cordless Framing Nailer
Sight lines on the guns nose and tool-free depth adjustments help users align this tool quickly.

  • Nosepiece adjusts in 1/10-inch increments over a 1/2-inch range
  • Nonslip handgrip for added safety and reduced fatigue
  • Rafter hook allows the tool to be hung between shots
  • Fuel cell capable of firing 1,200 nails
  • Battery drives up to 4,000 nails per charge

INDICATE 162 ON CARD

Hitachi Gas-powered Framing Nailer
This 3 1/2-inch round head framing nailer is completely cordless.

  • Powered by internal 7.2-volt NiCd battery that recharges in an hour
  • Can drive up to two nails per second; up to 1,000 per hour
  • Fires up to 3 1/2" x .13" round head nails

INDICATE 160 ON INQUIRY CARD

1 2 3 4 next