ConstructionDist.com |

Zircon Metal Detector
This hand-held unit is designed to detect metal studs.
• Can locate ferrous metal up to 4 inches below the surface; non-ferrous metal up to 2 inches deep — locations nails, rebar, duct work and screws
• Ideal for locating metal in lath and plaster, drywall or concrete
• Wide-field scanning with LED display
• Indicator lights and audio tone
INDICATE 133 ON INQUIRY CARD

FCI-Burndy Crimping Tool
This is a 15-ton capacity, battery-powered crimping tool.
• 18-volt power source
• C-head design has 355-degree rotation
• Audible “pop-off” tone signals successful crimp
INDICATE 134 ON INQUIRY CARD

Reelcraft Power And Light Cords
The Series LG medium duty power and light cords are available in heavier gauge up to 50 feet long.
• Can be mounted overhead, on a wall or used detached
• High-impact resistant composite contruction
• Adjustable cable stop and circuit breaker
INDICATE 135 ON INQUIRY CARD

Durham Full Line Catalog
This book features 68 pages of storage, material handling and safety products.
• Parts bins, drawer cabinets, metal and plastic component boxes and revolving shelves are part of the storage section
• Carts, hand trucks, racks and work benches are in the material handling section
• First aid kits and cabinet and spill control products are included in the safety section
INDICATE 136 ON INQUIRY CARD

Custom Leather Craft Gear Bags
The Climate Gear collection includes six weatherproof bags.
• Bags constructed of interwoven tarpaulin with polyester bottom with rubber strips and weather-resistant zippers
• Bags available in 9-, 12-, 14-, 18- and 25-inch sizes
INDICATE 137 ON INQUIRY CARD

CRC Industries Penetrating Solvent
Knock’er Loose Plus is a solvent that drops the temperature of the area it contacts with a freeze-shock action.
• Freeze-shock cracks rusted surfaces to allow penetration
• Loosens rust, scale, gum, grease and corrosion
• Works in cracks, seams, threads and joints
• Available in 20-ounce aerosol cans
INDICATE 138 ON INQUIRY CARD

B&G Sprayer
The Model 403 is designed specifically for acid, etching and staining.
• Heavy-duty polyethylene tank with funnel top design
• Repairable internal pump
• Braided, reinforced, chemical-resistant hose
INDICATE 139 ON INQUIRY CARD

QC Concrete Dye
This line, when applied to overlays, profiled or polished concrete, provides intense coloring.
• Doesn’t require film or coating that can wear away
• Available ready-to-use with either water or solvent base
• Available in 16 standard colors — can be diluted in the field for custom colors
• Available in 1-pint, 1-gallon and 5-gallon containers
INDICATE 140 ON INQUIRY CARD

Wiha Locking Blade Driver
The Drive-Lock VI features more than 50 interchangeable blade options.
• Allows adjustments from 1.7 to 4.7 inches in 1/8-inch increments
• Multi-component handle has roll-off protection design
• Click stoopball clamp holds blades in place
• Blades are hardened, chrome finished steel
INDICATE 141 ON INQUIRY CARD

Klein Tools Color-coded Tool Bags
There are nine new versions of the 5002 Series bags available in this tool bag line.
• New bags available in 16-, 18- and 20-inch models in blue, orange and yellow
• Canvas bags with multiple pocket configurations
• No. 8 colored canvas with vinyl-reinforced bottom and non-scratch studs
INDICATE 142 ON INQUIRY CARD

SMK Cordless Sprayer
The Hoss is a high-performance, cordless sprayer using a bucket or barrel as its reservoir.
• Sprayer designed for concrete sealers, stains, curing compounds, etc.
• Sprays materials with up to 30 percent solids
• 100 psi at 3 gallons per hour
• 80 gallons per battery charge — uses two DeWalt or Interstate 18-volt batteries
INDICATE 143 ON INQUIRY CARD

Sokkia C Series Lasers
This is a complete line of compact, automatic levels.
• Meet JIS Grade 4 specs for waterproofing
• Easy adjusting and easy setup, even in confined areas
• 1-foot minimum focus
INDICATE 144 ON INQUIRY CARD

Pramac Pressure Washers
These washers are designed specifically for heavy-duty work.
• Three models available in 2,000, 3,000 and 3,500 psi
• Powered by Honda engines
• Welded tubular and sheet steel construction
• Fitted with three ceramic pistons with double seal piston protection
INDICATE 145 ON INQUIRY CARD

Kafko Cleaning Solution
The Oil Eater is a cleaner-degreaser.
• Formula includes no acid, abrasives or petroleum solvents
• Non-flammable, water-based
• Biodegradable
• Available in 5-, 30- and 55-gallon containers
INDICATE 146 ON INQUIRY CARD

OLFA Utility Knife
This is a self-retracting safety knife.
• Dual edge, spring-loaded blades
• Blades retract as soon as slide is released
• High-impact, lightweight handle
INDICATE 147 ON INQUIRY CARD

Kraft Mortar Box
The Mud Dobber is designed to slow down mortar setup time while taking up little room on scaffolding.
• 22 inches wide, it holds 10 cubic feet
• Has 6-inch clearance for use with lift trucks
• 8-inch casters
• Reinforced 1-inch steel handle
INDICATE 148 ON INQUIRY CARD

Unistrut Hydraulic Cutting Tool
The Cut-N-Strut is a portable tool designed specifically to cut framing materials of any length.
• Blade set will cut P1000, P1100, P2000, P4000 and P4100 Unistrut channel
• Anodized aluminum frame weighs less than 50 pounds
• Universal hydraulic coupling connects to on-site hydraulic power source
INDICATE 149 ON INQUIRY CARD

Magnum Pro Framing Nailer
The Magnum Pro 34-degree nailer uses clipped or offset round head nails.
• Die-cast aluminum, ergonomically designed body
• Weighs less than 8 pounds
• Sequential, bump-fire trigger
• One-piece extruded aluminum allow magazine
INDICATE 150 ON INQUIRY CARD