ConstructionDist.com |

• Bimetal, self-drilling screws
• Head and shank of 300 Series (18-8) stainless steel
• Fused alloy steel drill point for one-step drilling and tapping into metals up to 1/2 in. thick
• Stalgard GB coating for greater galvanic compatibility in dissimilar metals

• Fasten fiber cement through furring strips to steel studs
• #2 square drive with #3 drill point
• Threaded to within 5/16-in. of top of head
• Self-Countersinking nubs under head insure seating of screw heads flush with work surface

• 23 to 14 gauge
• 3/8- to 2 1/2-in. leg length
• Made of glavanized, stainless steel, or aluminum

• Concrete flat washer head screw
• Different head designs for multiple applications
• Climatek coated for high corrosion resistance
• Star drive recess
• Lengths from 1 3/4 to 5 in.

• Designed for Senco’s screw driving tool
• Available in configurations for attaching drywall to wood and various gauges of steel
• In lengths from 1 1/4 to 2 in.
• An assortment of finishes available
• Available with coarse or fine threads

• Can be applied almost everywhere regular screws are used
• Provide double the holding power of ordinary nails
• Screws are available in 13 sizes of stainless or galvanized steel
• Available in 15° wire coil and 21° plastic strip.

• Specifically designed for hardwood decking
• Paddle-style drill point eliminates the need to pre-drill holes and reduces the chance of splitting the hardwood
• Collated to work with the Quik Drive auto-feed screw fastening system, which increases speed and allows users to stand while they work
• Made of type 305 stainless steel for premium corrosion resistance

• These round-head nails fit 20° nailers
• Available in bright and hot dip galvanized finish
• Available with smooth or ring shank
• Lengths from 2 3/8 to 4 1/4 in.

• Use 85% recycled metal content

• Can contribute to LEED credits

• Company’s “green” initiative includes using packaging of recycled cardboard and shipping with used pallets

• These “T” nails are specifically for floor installations
• Distinctive wide head design and "shark-like" serrated teeth
• Available in 2-, 1 1/2-, and 1 1/16-in. sizes
• 2-in. version available in stainless steel for use with ACQ-treated materials

• Developed specifically to combat wind damage
• Aggressive ring-shank and large head combine for improved shear withdrawal and pull-through resistance
• Designed for wood-to-wood or engineered materials-to-engineered materials connections, either structural or non-structural
• 2.5-in. nails available in in brite or galvanized finishes in two diameters: .113 and .131
• Coil collated or plastic collated

• UltraWedge line for heavy-duty applications
• Sleeve, drop-in, concrete, plastic and nylon anchors also available
• Package and bulk configurations

The Mechanical Plastics’ SnapSkru is a mini anchoring system.

• Locks in the wall and resists shocks and vibrations

• Small head — 0.44-inch diameter — hides behind fixtures

• Positive stop prevents over driving

• Fits flush; activates with an audible "pop"

• Magni-coated collated composite deck screws
• Designed for use with the PAM P13 Autofeed Screwdriver System
• Special head design eliminates "mushrooming" of the composite deck during installation
• Dual thread pulls the deck board and joist together more tightly
• Do not require pre-drilling
• Four coated colors: brown, red, tan, gray and stainless steel
• #10 by 2 ½ in. and #10 by 3 in. sizes

• Fast-curing; turquoise color thread coating
• Controls torque tension to a coefficient of friction .10 to .15
• Works when exposed to temperatures from -58° to 380° F
• Seals against pressure up to 5,760 psi

• Unique fastener with internally floating threads

• Designed to attach components in an off-center application — floating nut aligns to drive the angle of the screw to eliminate cross- threading and spin-out

• Designed for applications where cage nuts, clinch nuts and similar fasteners are normally used

• 3D CAD models available
  

• Cross between a traditional nail and traditional screw
• Can be driven with a pneumatic nailer twice as fast as collated screws and eight times faster than bulk screws
• Increased holding power versus nails
• Easy adjustment and quick removal

• Internally threaded, self-tapping screw anchor designed for cracked and uncracked concrete
• Suitable base materials include normal weight concrete, structural sand lightweight concrete and concrete over metal deck
• Installed into a pre-drilled hole using a Snake+ setting tool; no hammer required
• General application and uses include: suspending conduit, pipe supports, fire sprinklers, interior applications/low level corrosion environment, tension zone applications, seismic wind loading applications, suspended lighting

• Clips to truss without nails -- spaces and braces in one step with just a hammer
• Stays in place -- just sheath over
• For 16- or 24-in. on-center trusses
• Adds uniformity to the process while improving safety

• 15°, wire collated
• Available from 1 1/4 to 2 1/2 in.
• .093-in. diameter for fiber cement siding
• .234-in. head diameter, waffle texture
• 300 nails per coil, 12 coils per box

• Packs of 1,000 fasteners
• Available in an assortment of nail and brad sizes, styles and configurations

• ACI 318 category 1 anchor for cracked or uncracked concrete
• For medium to heavy loads
• Suitable for resisting seismic design loads
• Required hole diameter equals anchor diameter
• Nut and washer included with anchor

• 2003 and 2006 IBC compliant for cracked and uncracked concrete
• Anchor diameter equals hole diameter
• Fully threaded design eliminates subsurface obstruction problems and accommodates various material thicknesses at the same embedment
• Trubolt+ Seismic Wedge Anchor also available

• Seismic fixed and pivotal fittings can be retrofitted without fully removing threaded rods
• Install around existing threaded rods
• Provide attachment point for seismic bracing using metal framing or steel cables

• Build a staircase with minimal marks and cuts and less lumber
• Fasten treads and risers to a 2" x 6" stringer using pre-drilled holes and pre-marked measurements
• Left, right and bottom brackets, all of 16-gauge G-185 hot-dipped steel
• Accommodates any staircase pitch
• Minimal marking and cutting plus less wasted lumber
• Can be used indoors or outdoors

• Ground anchors provide stability
• Voids and gaps can be filled with cement-like grout

• Both fastener and anchor in one piece
• Available in an assortment of styles, including chrome, brass plated, black and white
• Installs in drywall, wood, concrete, hollow or grout-filled block, brick or plaster
• Heat-treated point will penetrate wood or steel studs
• Available in oval and pan head

• Designed for metal decks, purlin or tubular steel

• Expands to provide direct vertical attachments

• Swivel style allows to hang plumb in extreme roof pitches

• Sidewinder model expands horizontally