ConstructionDist.com |

Diteq Hand-held Grinders
These powerful tools can be equipped with dust collection systems.
• Easy to change brushes
• Variable-speed controls
• Vibration dampening handles
• Available in 5- and 6-inch capacities
INDICATE 14 ON INQUIRY CARD

Bosch Screw Guns
This is a complete lineup of screw guns for drywall installation.
• Five models with torque from 70 to 179 inch- pounds
• Each features Posi-lok nose piece for one-hand depth setting
• Compact, ergonomic designs
• Model SG45M-50 comes with 50-foot cord with twist-lock plug
INDICATE 15 ON INQUIRY CARD

TyRex Screw System
This is a system designed to work with collated screws for jobs such as drywall, backer board and window installation.
• Corner-fit nose piece allows for placing screws into corners
• Reverse-alert signal warns when tool is in reverse
• Variable-speed trigger
• 10-foot cord
• Handles 50-screw strips of 1- to 2-inch screws
INDICATE 17 ON CARD

M.K. Morse Circular Saws
These saws are designed specifically for cutting metal.
• 9- and 7-inch models
• 14-inch, carbide-tipped blades
• Low-speed, high-torque motors running on 15 amps at 1,300 rpm
• Can cut up to 5 1/8-inch round pipe and 3 3/4-inch rectangular
INDICATE 19 ON CARD

Hitachi Low-vibration Saw
This reciprocating saw has a new vibration protection system.
• Variable-speed, ergonomic design
• Weighs less than 10 pounds
• Two cutting modes for straight or "swing" cuts
• Tool-less blade changes
INDICATE 20 ON INQUIRY CARD

Perles Rotary Hammers
This Swiss company has a lineup of heavy-duty tools.
• 9-amp drill with 5/8-inch chuck
• Two-speed variable control
• Safety overload clutch
INDICATE 21 ON INQUIRY CARD

Ridgid Two-speed Hammer Drill
This is a heavy-duty 1/2-inch drill.
• Anti-vibration system
• Two-speed gearbox and safety clutch
• Keyed chuck
• 8.5-amp motor and a 12-foot cord
INDICATE 23 ON CARD

Festool Circular Saws
These high-tech tools feature a quick blade changing system.
• System includes spring-loaded spacer wedge, guide rail and clip-on splinter guard
• Saws available with cutting depths from 2 1/8 to 2 15/16 inches
INDICATE 25 ON INQUIRY CARD

Eazypower Heat Gun Kit
The deluxe kit provide a full lineup of accessories.
• 11-piece kit includes: spreader, reflector, glass protector, reducer, wooden handle for scrapers and four different scraper blades
• Heavy-duty gun packed with tools in plastic case
INDICATE 26 ON CARD

Muro Drilling Tool
The Easy Driver is designed to use collated screws in metal or woodframing.
• Adjustable depth control for repeatable countersinking
• Rubber nose protects work surface
• Drives 3/4- to 1 5/8-inch screws
• Available with power sources from Makita, DeWalt, Milwaukee and Sioux
INDICATE 27 ON CARD

Mi-T-M Metal Cutting Saws
These saws are designed to cut fast while reducing blade heat.
• 6-amp motor running at 3,500 rpm
• Chip collector and housing around 7-inch blade
• 45-degree bevel cuts with 2-inch depth of cut
INDICATE 31 ON INQUIRY CARD

Makita Spline Shank Rotary Hammer
This is a unique
1 9/16-inch tool.
• Rotary hammer with 12-amp motor turning at up to 460 rpm to deliver up to 2,600 blows per minute
• Dual function for hammering only, or rotation with hammering
• Torque-limiting clutch
INDICATE 32 ON CARD

Skil Drill/Drivers
These are 3/8-inch models.
• Model 6267 has a 5.5-amp motor and two-hand grip
• Model 6237 has a 5-amp motor and is designed for low-clearance applications
• Both come with built-in bubble level and keyless chuck
INDICATE 34 ON CARD

Holz-Her Reich Circular Saw
This is a high-tech entry from a German manufacturer.
• Angle of cut adjustment from 0 to 45 degrees
• 6-inch blade
• 8-foot cord
• Weighs less than 8 pounds
INDICATE 22 ON CARD

Drill Doctor Work Sharp Tool Sharpener
This tool is designed to restore a sharp edge on a variety of tools.
• Sharpens tools including chisels, putty knives, plane irons, carving tools, axes, etc.
• For optimum control, there’s a double-sided, slotted wheel so the user can see the cutting edge as it’s sharpened
INDICATE 33 ON CARD

Metabo Applies Porsche Design To Hammer Drill
This sleek pneumatic hammer drills into concrete, stone, wood and steel.
• A single switch makes all adjustments
• Housing made of carbon fiber and aluminum for extra strength without extra weight
• 6-amp motor applies up to 133 inch-pounds of torque
• With hammer bits, can drill 3/4-inch holes in concrete
INDICATE 117 ON INQUIRY CARD

DeWalt Hammers With HEPA Filters
This line of hammer drills now offers HEPA dust extraction systems.
• Filter system available on four models of 1-inch hammers
• Replacement filters
available
• Hammers feature 8-amp motors running to 850 rpm
INDICATE 28 ON CARD

RotoZip Spiral Saw
The RZ02 is designed for cutting drywall, paneling and other delicate materials.
• Compatible with all RotoZip attachments
• 5-amp, 120-volt motor
• Operates at 30,000 rpm
• Cord guard
INDICATE 116 ON INQUIRY CARD

Milwaukee Close Quarter Angle Drill
This tool performs like a standard drill but gets into awkward, hard-to-reach spots.
• Keyed 3/8-inch chuck
• Measures 3 7/8 inches from end of chuck to back of tool
• Paddle trigger for good grip and control
• 3.5-amp motor, drills at up to 1,300 rpm
INDICATE 16 ON CARD